تستر ظرفیت واقعی باتری های لیتیومی XH-M240
بعد از اتصال تغذیه تستر، باتری مورد نظر را برای تست به جا باتری سمت راست متصل میکنیم وکلید روی برد را روی on قرار دهید تا تستر روشن شود ،
ابتدا برای تنظیم کردن ولتاژ قطع دشارژ یعنی تا چند ولت دشارژ باتری صورت بگیرد دکمه اول و دوم (از سمت راست که روی انها علامت +و- وجود دارد) را فشار میدهیم تا ولتاژ قطع مورد نظر تنظیم شود ،
اگر led بالای دکمه چهارم (از سمت راست) چشمک زد یعنی ولتاژ قطع دشارژ بیشتر از ولتاژ باتری است وبا کمتر کردن ولتاژ قطع (به طوری که از ولتاژ باتری کمتر باشد ) این مشکل حل میشود ،
با فشار دادن کلید چهارم (از سمت راست ) عملیات تست باتری شروع میشود و با سه بار فشار دادن کلید سوم (از سمت راست) میتوان ولتاژ باتری ،mAh،mWh را مشاهده کرد،
مقاومت موجود در روی برد مصرف کننده باتری میباشد و با محاسبه مقدار جریان وتوان مصرفی مقاومت در واحد زمان، توسط تستر مقدار توان ذخیره باتری محاسبه میشود.
Battery Capacity Tester mAh mWh for 18650 Lithium Battery Voltage Discharge Capacity and Discharge Energy
Made of high quality electronic components, it is solid, durable and good conductivity and performance, long service life.
This battery capacity tester is used to test the voltage, discharge capacity and discharge energy of a 18650 lithium battery.
With dual working power supply, it has high working efficiency, and saves your time.
It can display discharge capacity and discharge energy.
And it supports parameter memory function, convenient for checking next time.
Battery capacity tester only, other accessories demo in the picture is not included!
Product Parameters:
Model: XH-M240
Display accuracy: 0.1
Measurement accuracy: 1mAH
Power supply: DC 5V-12V/18650 battery (Not included)
Standby current: 5-7mA
Discharge current: About 500mA
Load power: 10W, 8Ω
Installation hole: 3mm
Specification:
Material: Circuit Board, Electronic Components
Size: app.11 x 8cm/4.33 x 3.15in
Color: Green
How to use :
1: Put in the power supply battery to test the battery, turn on the power switch and display 4.1u, that is, the voltage of the test battery is 4.1v
2:Set termination voltage:Press + or – to display the termination voltage, and press + or – to set the termination voltage.(default: 3V)
3: Press the start button to start discharging (discharge current is about 500mA). At this time, the LED displays to detect the remaining battery voltage of 4V
4: Press the battery voltage switch key to mAh , display the discharged 20mAh
5: Press the second button to display 77mWH discharge in mW
6: When the discharge is completed, the display has been discharged 1900mAH, the red indicator light above the reset key is flashing state
mas1365216 –
سلام خسته نباشید. این ماژول موجود هست، من حضوری بیام فروشگاه و خرید کنم.؟
orkid_admin –
سلام بله موجود هست
saeedbagheri5791 –
سلام خسته نباشید.ماژول مشخص نیست دوباره کی موجود شه؟
orkid_admin –
سلام خدمت شما
فعلا مشخص نیست