These dry-reed switches have been hermetically sealed in a gas-filled glass envelope.
Actuation is done with an electromagnet, a permanent magnet, or a combination of both.
If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil.
They feature single pole, single throw, normally open contacts.
Please note when bending or cutting the leads be careful not to put any stress on them as this will break the hermetic seal.
Glass : Length: 18mm
Glass : Diameter: 0.1inch
Total length: 43mm
Contact: Normal Open(NO)
Maximum switching voltage: 300 VDC
Minimum breakdown voltage: 150 VDC
Maximum contact rating: 10W
Maximum switching current: 0.55 A
Maximum operating time: 0.45 ms
Bounce time: 0.25 ms
Maximum release time: 0.35 ms
Resonant frequency: 5000 HZ
Maximum operating frequency: 400 HZ
Pull in value: 20-70 AT
Minimum drop out value: 4 AT
Maximum contact capacitance: 0.5 pF